The moon with Mars right beside it.
Super excited to actually get a semi-decent photo of Mars and the Moon tonight, using my phone. Thanks to youtube.com/@astro_alexa..., for posting about it the other day. Alas, doesn't look like she is on here.
Voron 2.4 tool changer 3d printer.
Finally got my Voron 2.4 Stealthchanger mostly operational. Yeah, it's only got a single toolhead, but really I just need it back up and running right now. When I get some time, I'll add more toolheads. Just need to finish the wiring on them.
3d printed keychains
Messed up 3d printed keychains
3d printed fridge magnets
Printed some Jeep Rubber Ducky keychains for Xmas presents. No AMS or filament changer, so 91 manual color swaps 🥴 messed up the first time around, but saved the day by turning them into fridge magnets.
3d printed Wolverine Claw prop.
Yup, the Naboo Starfighter from Willi on Printables. The other part was the base of the Wolverine Claw from Hex3D... Still need to clean it up, Gloop it together and then figure out how to paint it.
3D printed parts
Still need to assemble the FAb365 Saturn V rocket, but while that is sitting in a box waiting for my time, why not start two other projects 🤣 Any guesses?
3D printed model of a Saturn V rocket
The last of the silver finished overnight. Not sure how, but it looks like they are nearly solid, which explains the 1.5 day print time.
I have to slice the red parts, then double check I printed everything. Looks like the Gloop is a few days out, but hopefully I can assemble it this week.
3d printed model of a Saturn V rocket
The second plate of silver is done, the first was just the fins, the third plate is going now, and almost done. Then on to the big day and a half of printing plate.
I really want a resin printer, but I really really don't want to deal with resin and all that 😕
3d printed model of a Saturn V rocket
I printed the tall black parts last night, now I am on to the silver parts. Looks to be about 2.5 days of printing.
3d printed model of a Saturn V rocket
It's been a while, took a break, but back to printing the Fab365 Saturn V rocket. Here is where it is now, I have some black parts going now, I also have some Gloop coming to start gluing it together.
Donuts
Made some baked Mexican Chocolate donuts today, they are pretty dang good if I do say so myself 😉
3D printed model of a Saturn V rocket
First plate of Black parts finished yesterday, starting another this morning.
3D printed model of a Saturn V rocket
3D printed model of a Saturn V rocket
Forgot to post last night, but the fourth (I think) white plate finished with some smaller parts, and the fifth finished this morning. Now on to the Black parts.
3D printed printer parts.
Printing some 2.4 parts and I just love doing the mesh skirts.
I may do one of the other models much bigger, just for fun, but I would need a whole lot more filament to go that big for this one. I am also half way done :(
3D printed model of a Saturn V rocket.
Also a picture of all three completed sections, sitting on one of my 350mm Voron 2.4's for scale. Honest, I wish I had just gone for it and maxed out the SV-06 plate, it would have been nearly 5.5ft tall 😍
3D printed model of a Saturn V rocket
And, the third big section is done. I started this one yesterday and actually forgot to check on it before bed last night, so I was very happy to see it had no issues. Some smaller white pieces to go, then on to the black parts.
3D printed model of a Saturn V rocket
Just realized I never posted the finished print for the first one...
3D printed section of a Saturn V rocket
Second part is finished, now on to part three.
Part of a 3d printed Saturn V model.
First part came out great, just over a day of printing. I am tempted by the SV-08, but I don't do a lot of PLA, and my Voron's handle all my ABS/ASA needs.
Looking good so far, 1/5th of the way through this part.🤞
3D printer printing
Wish me luck, started printing the Fab365 Saturn V rocket. Only 170hrs of printing to go....
Drawer set with 3d printed feet.
Desk and drawers at the same height.
Doh, I guess I should measure twice, print once... New Ikea drawers with my nice 3d printed feet are as tall as my desk :(
3D view of some legs for an Ikea Alex drawer.
Printing some legs for the Ikea Alex drawers I bought yesterday :D
Two sets of 3D printer parts that are similar, yet different from each other.
The downside of working on something that is actively being developed, is having to reprint parts that have changed. I should have ordered two spools of filament 🤣
Thank you
It's a Voron 2.4 350mm. I am converting it to a tool changer using the Stealthchanger design. It will have 6 toolheads.
Partially assembled Voron printer.
I am really hoping to get this printing by Tuesday 🤞
Do you have a showroom, or offer local pickup?
Wow, I didn't know Polymaker was starting production in the US. Also, I had never heard of Sliceworx and they are 15 minutes from my place, time to go shopping 😃
