MKM Modelwerx

It’s an improvement at least.

My model building room full of stuff that needs to be sorted, tidied, stored and/or binned.

Need to get this shit show dealt with so I can get back to building. 😩

Mine has been sitting on a shelf for months with only the first colour applied. Really need to try and get back to it.

Base with 6mm tube:

www.ebay.co.uk/itm/12730998...

Base with 5mm tube:

www.ebay.co.uk/itm/12730998... (10 available)

3D Printed Scale Model Base Kit With 4mm Metal Tube. | eBay UK A model base for small to medium sized models. Measures 12cm x 12cm x 3cm. Designed for wiring to light your models. Builders can choose to wire their models through the metal tube, or via a hole behi...

I'm selling these 3D printed model bases I designed so that I might be able to buy a resin 3D printer. Includes everything pictured.

Base with 4mm tube:

www.ebay.co.uk/itm/12730998... (10 available)

#ScaleModels #ModelBuilding

Beautiful

Working on something new. #StarTrek #StarTrekModels #3DPrinting #ScaleModels #MKMModelwerx

Too many, I keep printing more and don’t know which one to start first.

Now that I’ve got a black primer coat applied to the #Defiant, I can finally see all the areas I’ve missed with the milliput and where I still need to scribe some gridlines. #StarTrek #StarTrekModels #ShipsOfStarTrek #3DPrinting #ScaleModels #MKMModelwerx

Thank you! 🖖🏻

Thank you! 🖖🏻

The commission I’ve been working on for the last couple of months can finally be revealed. #StarTrek #StarTrekModels #3DPrinting #ScaleModels #MKMModelwerx

Some don’t like the #Inquiry class, but I’ve always loved it and wanted a model but there was never any in 1/1400 scale, so I bought the 1/2500 one by valkyrie013 on cults3D and scaled it up as close as I could… #StarTrek #StarTrekModels #ShipsOfStarTrek #3DPrinting #MKMModelwerx

MKM Modelwerx (@mkm_modelwerx@pixelfed.social) The 1/350 #Defiant doesn’t have most of the grid lines, so I used the 1/1000 version as a guide and pencilled in the lines before scribing them into the plastic. It’s not perfect but it’s good enough....

The 1/350 #Defiant doesn’t have most of the grid lines, so I used the 1/1000 version as a guide and pencilled in the lines before scribing them into the plastic. It’s not perfect but it’s good enough. #StarTrek #StarTrekModels #ScaleModels #MKMModelwerx

pixelfed.social/p/mkm_modelw...

MKM Modelwerx (@mkm_modelwerx@pixelfed.social) #Defiant’s starboard nacelle has been sanded, glued into place, LEDs wired up, closed up and lights tested. Port nacelle next. #StarTrek #StarTrekModels #ShipsOfStarTrek #ScaleModels #MKMModelwerx

#Defiant’s starboard nacelle has been sanded, glued into place, LEDs wired up, closed up and lights tested. Port nacelle next. #StarTrek #StarTrekModels #ShipsOfStarTrek #ScaleModels #MKMModelwerx

pixelfed.social/p/mkm_modelw...

#Defiant’s nacelles have finished printing, supports removed and test fit. Another comparison pic with the 1/1000 scale version. #StarTrek #StarTrekModels #3DPrinting #ScaleModels #MKMModelwerx

Light test of the #Defiant build so far. #StarTrek #StarTrekModels #ScaleModels #MKMModelwerx

Printing progress of the #Defiant’s nacelles. #StarTrek #StarTrekModels #3DPrinting #ScaleModels #MKMModelwerx

MKM Modelwerx (@mkm_modelwerx@pixelfed.social) Had to scribe the panel lines on the #Defiant’s bridge section as there were none. Will probably have to do this with most of the model. #StarTrek #StarTrekModels #MKMModelwerx

Had to scribe the panel lines on the #Defiant’s bridge section as there were none. Will probably have to do this with most of the model. #StarTrek #StarTrekModels #MKMModelwerx

pixelfed.social/p/mkm_modelw...

MKM Modelwerx (@mkm_modelwerx@pixelfed.social) While I wait for the two nacelles to print, here’s a size comparison of the 1/350 #Defiant and 1/1400 #Galaxy class. #StarTrek #StarTrekModels #3DPrinting #ScaleModels #ModelBuilder #MKMModelwerx

While I wait for the two nacelles to print, here’s a size comparison of the 1/350 #Defiant and 1/1400 #Galaxy class. #StarTrek #StarTrekModels #3DPrinting #ScaleModels #ModelBuilder #MKMModelwerx

pixelfed.social/p/mkm_modelw...

More painting of the #Defiant parts and starting modifications. #StarTrek #StarTrekModels #ScaleModels #ModelBuilder #MKMModelwerx

Another new commission. 1/350 3D printed USS #Defiant. Shuttlebay painted while I print more parts. #StarTrek #StarTrekModels #3DPrinting #ScaleModels #ModelBuilder #MKMModelwerx

MKM Modelwerx (@mkm_modelwerx@pixelfed.social) Finally got the major milliput work done on the commission build. Once set I can get it sanded then see if I need to go back over some areas. #StarTrek #ShipsOfStarTrek #ScaleModels #ModelBuilder #MKM...

Finally got the major milliput work done on the commission build. Once set I can get it sanded then see if I need to go back over some areas. #StarTrek #ShipsOfStarTrek #ScaleModels #ModelBuilder #MKMModelwerx

pixelfed.social/p/mkm_modelw...

MKM Modelwerx (@mkm_modelwerx@pixelfed.social) Taking another break from milliput/sanding on the commission build, so I’ve wired up the LEDs in its secondary hull and nacelles and completed assembly. Just need to finish milliput/sanding the sauce...

Taking another break from milliput/sanding on the commission build, so I’ve wired up the LEDs in its secondary hull and nacelles and completed assembly. Just need to finish… #StarTrek #StarTrekModels #ShipsOfStarTrek #ScaleModels #ModelBuilder #MKMModelwerx

pixelfed.social/p/mkm_modelw...

Brilliant! This is on my “really want, but will never have” list along with the 1/650 1701-E

MKM Modelwerx (@mkm_modelwerx@pixelfed.social) Aztec masks for the 1/650 Essex have been created, cut then applied to the sphere. #StarTrek #ShipsOfStarTrek #ScaleModels #ModelBuilder #MKMModelwerx

Aztec masks for the 1/650 Essex have been created, cut then applied to the sphere. #StarTrek #ShipsOfStarTrek #ScaleModels #ModelBuilder #MKMModelwerx

pixelfed.social/p/mkm_modelw...

A short animation with the 3d model of the Prometheus from Stargate that I made.

Enjoy.

#Stargate #scifi #lightwave #3dmodeling

MKM Modelwerx (@mkm_modelwerx@pixelfed.social) Finally got round to putting the first main colour on the 1/650 “Essex”. Now I just need to create some masks for the sphere section. I’m planning on basing them on the NX Class saucer Aztec pattern. ...

Finally got round to putting the first main colour on the 1/650 “Essex”. Now I just need to create some masks for the sphere section. I’m planning on basing them on the NX Class saucer Aztec pattern. The rest will of the ship... #StarTrek #ScaleModels #MKMModelwerx

pixelfed.social/p/mkm_modelw...

MKM Modelwerx (@mkm_modelwerx@pixelfed.social) Had to take a break from all the milliput/sanding on the commission build, so I’ve returned to the Olympic to do some painting. First of the main colours (blue) has been applied. I’ll wait a few days ...

Had to take a break from all the milliput/sanding on the commission build, so I’ve returned to the Olympic to do some painting. First of the main colours (blue) has been applied. I’ll wait a few days to let it dry properly... #StarTrek #ScaleModels #MKMModelwerx

pixelfed.social/p/mkm_modelw...